Ultimaker Tough PLA Grey | 2.85mm | 750g

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Ultimaker Tough PLA Grey | 2.85mm | 750gTough PLA 0. 75kg. 2. 85mm diameter and approximately 90m long. Ultimaker Tough PLA is a technical PLA filament with toughness comparable to Ultimaker ABS. Ideal for reliably printing technical models at larger sizes, our Tough PLA offers the same safe and easy use as regular PLA. Reasons to choose Ultimaker PLA ToughWith an impact strength similar and higher stiffness compared to Ultimaker ABS, Tough PLA is less brittle than regular PLA and gives a

PRINTING TEMP

layer height: €š¡ ° ¤ 0

Autodesk Fusion 360 training ensures that you make the most of this unique 3D Design

Arnitel ® is a soft and flexible material that brings speed to your 3D printing production - it loads onto the machine and prints twice as fast as other TPCs

UV Crystal Clear has been specifically developed to allow the fabrication of extremely clear objects with a smooth

not only on the printing speed

even when you need it to be strong or temperature-resistant

PRINTING DIRECTION XY Printing Speed 20-70 mm/s Infill 100% - rectilinear Infill Angle 45°/-45° Nozzle Temperature 210-250°C Bed T° 60-90°C PRINTED SPECIMENS PROPERTIES

it’s just twice as thick

4 MPa Tensile strain at strength ISO 527-2/1A/50 4

31 Elongation printed specimen (0°) % 3

and lightweight properties

Exchange/Return Notes