LSU4.2 WBO2 Wideband Sensor Extension Cable (10ft) Fiberglass Loom

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

LSU4.2 WBO2 Wideband Sensor Extension Cable (10ft) Fiberglass LoomThis is a 10ft extension for the Bosch LSU4. 2 sensors, such as 17014. This sensor is used in MANY aftermarket wideband sensor controllers. This is perfect if you need a little extra length in case your sensor is far away from the firewall access hole. This is a common issue with some applications that has the sensor a long way from the ECU and firewall access. 10Ft length with fiberglass wire loom and rubber boot at both ends, as pictured. Made with

SDcard install + small repairs: If you order an SD card module along with this Repair/Upgrade we will install it at no additional cost

Remove the factory O2 sensor and Install the new Bosch wideband sensor in the exhaust

The included 4bar MAP sensor is great for normally aspirated cars and perfect for boosted applications

"Made the switch to vems a few years ago with great success

Control of individual fuel injectors and ignition coils *with added wiring

calibrate the TPS

Advanced Idle Air Control

If you need an adjustment for weather change

you can contact us and we'll help determine whether ECU changes are needed or not to support DBW

You will follow the instructions and submit your logs

The strategy is as follows: driveability first

Genuine part