8612 B&K Precision DC Electronic Load New

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

8612 B&K Precision DC Electronic Load NewKey Features at a Glance Power range up to 6,000 W in a single 6U chassis Voltage range up to 500 V, current up to 720 A CC CV CR CW operating modes Transient mode up to 25 kHz with 16 bit measurement List mode, battery test, automatic test mode, CR LED mode OVP OCP OPP OTP with local and remote reverse voltage protection Standard USB (USBTMC) and RS232; GPIB optional on select models NI certified LabVIEW drivers and free battery test software

NOR) of the four input channels (Hi

Important: Maximum continuous power available is derated linearly from 40 °C to 75% of maximum at 55 °C

200 W total power

1GSa/s Real-Time Sampling Rate for Each Channel

MyScope interface

Sensitivity from 2 mV to 5 V/div with calibrated fine adjustment

The MSO designation adds 16 digital channels along with parallel bus trigger and analysis

5 pF ± 2 pF Input Sensitivity Range 2 mV/div to 5 V/div Vertical Resolution 8 bits Max Input Voltage 300 VRMS with peaks ≤450 V DC Gain Accuracy (with offset set to 0 V) ± 3% for 10 mV/div to 5 V/div

Logic (requires TDS3TRG) PATTERN: Specifies AND

999 events

4 GSa/s (4 channel mode) 54810A 500 MHz 2 1 GSa/s 54815A 500 MHz 4 1 GSa/s 54820A 500 MHz 2 2 GSa/s Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below

as detailed in the comparison table below

Exchange/Return Notes