PELCO® EBSD Pre-Tilt Holder with Small Set Screw Vise

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

PELCO® EBSD Pre-Tilt Holder with Small Set Screw ViseDESCRIPTION 70 pre tilt holder with removable 3. 2mm (1 8") pin to allow M4 mounting. Machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360. Single stainless steel set screw into an open slot that is 4mm (0. 157") wide x 5mm (0. 197") deep. 12. 7mm (1 2") x 17. 7mm (0. 70") high. Allen wrench included. PELCO EBSD Holder with Small Set Screw Vise, Pre tilt, Pre tilt 70, 3. 2mm (1 8") Pin

35 Cantilever Geometry: Triangular Cantilevers Number: 1 Back Side Coating: Proprietary reflective coating

A gentle venting procedure ensures that the TEM grids are not disturbed when the system is vented

602-02L - PELCO X-Checker® B: Mn

Wafer thickness:

Leo Barish’s papers referenced below and others not mentioned cover this subject

5+/-5 Tip Radius (Nom): 20 Tip Coating: Highly conductive single cystal diamond Tip Set Back (Nom): 15-25 Tilt Compensation: 0 +/- 1

16mm) or 22x22mm with thickness #2 (0

The heat and electrical conducting properties of carbon help to stabilize the Formvar films when exposed to the electron beam

15365-2 or 15374-2) to increase height

01803G - Formvar/Carbon 200 mesh TH

VITA NanoTa

shown holding pin stubs and bottom