Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

JET RSB Nozzle | 0.4mmThe JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside, due to a special treatment. PRINT 3 5 degrees lower because they are so slippery inside, to eliminate dripping. JET RSB nozzle is available in sizes: 0. 25mm 0. 40mm 0. 60mm 0. 80mm WHY JET RSB? These new nozzles are meant for Speed! Plastic will flow more easily than in most other

wipe down your bare build platform making sure it is clean and free of debris

Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started

3D printer management simplified

It is an easy material to print with and Ultrafuse PLA gives a smooth printing result

A heated build plate which enables the creation of strong and flexible prints using a variety of materials including PLA filament

food approved PET (Polyethylene terephtalate)

Become a certified Intermediate 3D Printer user with our half day workshop

7in) Build volume 255x155x170mm (10x6x6

These adhesives for professional use make sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools and the glue residue should also be easily cleaned off

This is the Heated Bed Assembly for the:

the sensor will automatically detect when a material has run out and will pause your project until you to return

the warranty will become invalidated if the product was at any time disassembled or reassembled by persons not authorised and confirmed by Raise3D to be qualified

Exchange/Return Notes