Linear Shaft on Low Profile Rail - Carbon Steel LSRA32-024.000-SL Diameter: 2"Length: 24" simplicity-linear-slide-assembly

Linear Shaft on Low Profile Rail - Carbon Steel LSRA32-024.000-SL Diameter: 2"Length: 24" simplicity-linear-slide-assembly2 Inch Diameter Carbon steel linear shaft, precision case hardened and ground, fused to a low profile AISI C 1018 Steel Linear Support Rail. This Low Profile Linear Support Rail Assembly (LSRA) is 40% lower than regular assemblies. Length: 24" Not Drilled If standard mounting holes are required on the support rail, specify this via Configure CAD & Quote below using the part number LSR 12 PD which will get you standard industry hole spacing (you can

45mm OD and 40mm length

Linear Shaft made of 1060 Carbon Steel and of 5/8" diameter

25" ID (inner diameter) featuring a crowned shell linear bearing for self-alignment in an aluminum alloy housing

Optional liners: Corrosive chemical resistant Frelon®J + FDA compliant Frelon®W

Linear Shaft made of 1060 Carbon Steel with a 1" diameter and 24" length

Open plain linear bearing with an 8mm ISO Metric precision ID which has a 0

ISO metric series uses PM and PMN part numbers

Length: 508mm

Rectangle Anti-Backlash Nut

The rail specifically consists of 18MnNb6 ferritic steel (yield: 430 N/mm²

Open self-lubricating plain linear bearing with a 50mm JIS Metric inner diameter and a precision running clearance of 0

This large sized steel shelled model is ideal for heavy die sets