2.5" Diameter Single Wafer Carrier Box - including Container, Cover & Spring - 8 sets/pck - SP5-S25 Pressing Dies

2.5" Diameter Single Wafer Carrier Box - including Container, Cover & Spring - 8 sets/pck - SP5-S25 Pressing DiesWafer Container This wafer container is designed for 2. 5 Inch diameter wafers. It can prevent precision wafers such as Si, quartz, LiNbO3 etc, from damage and contamination during shipping and storing. The additional advantage is quite convenient in the process of cleaning and assembling. Each complete set includes three parts, e. g. container, cover and spring The wafer container is packed in 1000 class clean room and plastic bag

Operating Temperature 1200ºC Application Notes Vacuum pressures may only be safely used up to 1000°C

Mcdanel strongly recommends keep ramp rate less than 100oC/ hour at 400 - 1700 oCrange

Glove box sample transfer: Oxygen-sensitive samples in the glove box can be placed in the tank and then removed directly from the glove box for transfer

Limit: 70 centigrade

5mm(ID) x 68mm(H)

If CVD gases are considered to be corrosive to stainless steel

Click the picture above for more products

200 kgf/ cm^2

Parts should not be placed directly onto the inside surface of a hot furance tube incase of thermal shock

CaO+MgO < 0

Item Description Qty 1 Battery analyzer + Brand new laptop with MS Windows 11 system and battery analyzer operation software installed 1 pc 2 RS232-to-USB Adapter for connecting the analyzer to the USB port on the computer 1 pc 3 Test-Control software 5

less than 35% of the total output power should be applied to avoid stressing the elements with excessive current