Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron - Specification for spigot and socket systems Ingestion-build-89079

Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron - Specification for spigot and socket systems Ingestion-build-890791 Scope This Part of BS 416 specifies cast grey or ductile iron spigot and socket pipes manufactured by either the sand cast or the spun process, with either Type A or Type B sockets (see Table 1). This Part of BS 416 also specifies sand cast fittings. These pipes and fittings are for use above ground (see 2. 1) in discharge or ventilating pipe systems in buildings. This Part of BS 416 specifies quality of material, critical dimensions and tolerances,

coastal and freshwater environments

BS EN 14865-2 standardizes a test method and acceptance criteria for the demand in EN 12081 for testing the mechanical stability of axlebox lubricating greases

BS EN 62379-5-1 specifies the common control Interface

• the environmental stresses expected during the normal service conditions

BS EN 54-23 can ensure your visual alarm devices play a positive role in the optimal performance of fire detection and fire alarm systems

airports and air navigation service providers

BS 6319-1 is the first part of the BS 6319 series that gives a general introduction to the testing of resin compositions and describes a procedure for obtaining samples of resin compositions and preparing test specimens under either declared practical conditions or more closely controlled laboratory conditions

Has been fully revised to be more accessible and appropriate for the sector

As part of an agreement for the admittance of systems into the open systems environment

ISO 9407 describes the terms and definitions

Note: ISO 22477‑5 does not provide specifications for the size of the proof load and the limiting criteria

many of the principles are equally applicable to machines of a smaller size