180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-1/4" OD, 5" CLR) 0.049"

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-1/4" OD, 5" CLR) 0.049"Specs Outside Diameter of the Tubing (OD): 1 1 4" (31. 8 mm) Minimum Wall Thickness (DOM): 0. 058" (1. 5 mm) Minimum Wall Thickness (4130): 0. 058" (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065" (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 5" (127 mm) Maximum Degree

Minimum Outside Diameter (OD): 1/2" (12

6 cubic inches per minute oil output

Minimum Size: 3/4" (19

Use with our 105 Heavy Duty tube bender for manually bending tubing

Full Pin Set

Outside Diameter of Pipe: 1

so contact us if you need something ASAP

Outside Diameter of the Tubing (OD): 5/8" (15

Outside Diameter of the Tubing (OD): 1" (25

Bend up to 2"

3 x OD (See Die Charts for details

Minimum Centerline Radius (CLR): Approx