Castle Nut Driver for MV Agusta Yamaha Special Tools

Castle Nut Driver for MV Agusta Yamaha Special ToolsUsed for removing, adjusting and replacing steering column tube nut on various MV Augusta including F4 1000F, F4 750, Brutale etc 6off 4mm diameter connection pins. Internal diameter 23mm, external 31. 5mm. Uses 3 8" drive socket wrench or 24mm spanner socket

but as a vacuum brake bleeding tool has to be one of the top uses

• Hook and pin interchangeable hinged arms covering sizes 19-51mm

maximum rim diameter 23" (585mm)

A comprehensive set with deep reach sockets as well as standard

- Aluminium oil filter wrench

- Pin sizes 4-8mm

You should wear a mask and eye protection when blasting with soda

The Z1 Owners Club have links to downloadable files for club members on their forum

- It is recommended the caliper bleed nipple is opened while the pistons are being forced back to prevent old fluid being pushed back into the master cylinder

After a while it will become second nature to you

Additional Information

5/16" & 3/8"